BMW 3 of the E46 series
+ BMW 3 Cars (E46)
+ Current leaving and service
+ Engine
+ Cooling systems, heating
+ Power supply systems, injection and release
+ Electric equipment of the engine
+ RKPP and transmission line
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
- Dignostika of electric elements
Diagnostics of malfunctions of onboard electric equipment - the general information
Safety locks - the general information
Replacement of safety locks
Fusible inserts - the general information
Chain breakers (thermal relays) - the general information
The relay - the general information
Check of the electric motor of a screen wiper
Check of a stoplight
Check of the warmed back glass
Removal and installation of the sensor of temperature
+ Lighting and alarm system
+ Devices and equipment
+ Schemes of electric equipment
|
Check of a stoplight 1 If the stoplight at the pressed pedal of a brake does not light up, it is necessary to check the corresponding safety lock at first.
2 If the safety lock is serviceable, check stoplight lamps. If necessary replace them.
|
3 Check the stoplight switch. For this purpose uncover over a brake pedal. Rasstykuyte switch socket. |
4 Include ignition.
5 Connect a short auxiliary wire both contacts in the stoplight switch plug. If now the stoplight lights up, the switch is faulty and it should be replaced.
6 Otherwise check the light module. |
|