BMW 3 of the E46 series

since 1998 release

Repair and operation of the car


BMW 3 of the E46 series
+ BMW 3 Cars (E46)
+ Current leaving and service
+ Engine
- Cooling systems, heating
   + engine Cooling system
   - Heater and conditioner of air of salon
      Removal and installation of the control unit of the heater/conditioner
      Removal and installation of the fan of a heater
      Replacement of additional resistors of the fan of a heater
      Removal and installation of air deflectors
+ Power supply systems, injection and release
+ Electric equipment of the engine
+ RKPP and transmission line
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schemes of electric equipment

http://kuku-shanel.com/verhnyaya-odejda-dlya-jenschin-puhoviki-i-vetrovki-belogo-tsveta.html

Replacement of additional resistors of the fan of a heater

The heater without conditioner If the fan does not rotate only on one of speeds the reason, as a rule, lies in defect of the resistor. In this case it is necessary to replace a set of additional resistors.

At cars with air conditioning automatic equipment additional resistors are absent. The number of turns of the electric motor is regulated directly by a monitor the conditioner.


 REMOVAL

1 Uncover fan wheels. The order of removal is given in the Section Removal and installation of the fan of a heater.
2 I will corrode Rasstykuyte and unscrew the screw of fastening of additional resistors from the electric motor.



 INSTALLATION

1 Fix additional resistors on the electric motor, join the socket.
2 Fix a fan wheel cover four screws. The description of the subsequent operations is provided in the Section Removal and installation of the fan of a heater.