BMW 3 of the E46 series
+ BMW 3 Cars (E46)
+ Current leaving and service
+ Engine
+ Cooling systems, heating
- Power supply systems, injection and release
Security measures and rules of observance of purity during the work with fuel system
Removal and installation of the sensor of a reserve of fuel / fuel pump
Check of the sensor of a reserve of fuel
+ Power supply system of petrol engines
- System of injection of fuel of the petrol engine
The general information and security measures at work
Principle of work of DME system
Removal and installation of injectors
Check of system of injection of the petrol engine
Check and adjustment of turns of idling and concentration WITH
+ Power supply system of diesel engines
+ System of production of the fulfilled gases
+ Electric equipment of the engine
+ RKPP and transmission line
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schemes of electric equipment
|
Check and adjustment of turns of idling and concentration WITH Within carrying out maintenance adjustment of number of turns of idling, the moment of ignition and concentration WITH is not carried out as these parameters are continuously traced by an electronic control system of the engine.
If after all the deviation of the valid values of parameters from demanded takes place, the reason lies in failure of the corresponding elements which need to be replaced. The qualified check of a control system of the engine is possible only by means of special diagnostic units. Address to the Section the Main data on system of electronic control by the engine. |
|