BMW 3 of the E46 series

since 1998 release

Repair and operation of the car



BMW 3 of the E46 series
+ BMW 3 Cars (E46)
+ Current leaving and service
+ Engine
+ Cooling systems, heating
+ Power supply systems, injection and release
- Electric equipment of the engine
   General information and security measures
   + System of electronic control by ignition and injection of the petrol engine
   - System of ignition
      Spark plugs
      Removal and installation of coils of ignitions / cables of ignition
      Check of the moment of ignition
   + System of preheat of the diesel engine
   + Systems of a charge and start
+ RKPP and transmission line
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schemes of electric equipment



Removal and installation of coils of ignitions / cables of ignition

Models 316i, 318i

 REMOVAL

1 Rasstykuyte shtekerny connections of spark plugs for what turn the regulator-1-to the left.

2 Turn off 2 nuts of fastening of coils of ignition to the holder and remove coils.
3 Mark a tape ignition cables not to mix them. The cylinder 1 is ahead in the direction of the movement. Disconnect cables from the lower party of coils of ignition.
4 Disconnect cables at spark plugs.


 INSTALLATION

5 Join ignition cables with candles.
6 Join ignition cables with coils in the lower part, observing marking.
7 Fix ignition coils two nuts to the holder.
8 Join shtekerny connections of coils of ignition and fix makhovichka.