BMW 3 of the E46 series

since 1998 release

Repair and operation of the car



BMW 3 of the E46 series
+ BMW 3 Cars (E46)
+ Current leaving and service
+ Engine
+ Cooling systems, heating
+ Power supply systems, injection and release
+ Electric equipment of the engine
+ RKPP and transmission line
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   General information and security measures
   + Leaving and repair of damages of a body
   + External elements of a body
   - Internal elements of a body
      Removal and installation of forward peaks of the dashboard
      Removal and installation of facing forward parts of the region of feet
      Removal and installation of the left ware box
      Removal and installation of the right ware box
      Removal and installation of the central console
      Removal and installation of the central armrest
      Removal and installation of a pocket of the console of switches
      Removal and installation of the console of switches
      Removal and installation of the electric motor of the drive of the movable panel of a roof
      Removal and installation of a mirror of an interior
      Interior mirror with automatic blackout
      Removal and installation of lateral facing of a luggage carrier
      Removal and installation of facing of the back panel
      Removal and installation of facing of a trunk lid
      Removal and installation of a head restraint of a forward seat
      Natyazhitel of a seat belt. Main data and security measures
      Removal and installation of a forward seat
      Removal and installation of a back seat
      Removal and installation of nozzles of windscreen washer
      Adjustment of nozzles of windscreen washer
      Removal, installation and check of nozzles of a faroomyvatel
      Removal and installation of levers of a screen wiper
      Removal and installation of the tank/pump of a washer
+ Onboard electric equipment
+ Schemes of electric equipment



Removal and installation of the central console

 REMOVAL

1 Remove two hands the gear shifting lever handle-2 up.

2 Disconnect a cover-1 levers of switching and remove it upward.

3 Disconnect a cover-1 levers of switching and remove it via the lever.

4 Open a curtain-1-and press completely down. Thus, the ashtray-2-or the pocket established instead of it is wrung out up.

5 Take out an ashtray/pocket up.

6 Turn out two screws of fastening of the holder-3-. Position of screws is shown on an illustration by a position - And-.

7 Rasstykuyte I will corrode ashtrays.

8 Turn out screws-1-.

9 Open clamps-2-and-3-and remove a peak-4-up. If necessary take out a cable of the lighting lamp of an ashtray-5-.

Positions of clamps are designated on point 13 illustration in the subsection "Installation".

10 Turn out-2-, a rasstykuyta on the back party the socket of the switch and remove a peak.

11 Lift if is available, the central armrest-1-.

12 Raise the central console-2-behind and remove through the central armrest and the lever of the parking brake-3-.


 REMOVAL

13 Check, whether-4 clamps-2-and-3-, and also directing-5-are damaged at a peak. If necessary replace a peak.

14 Installation is carried out in sequence, the return to removal.