BMW 3 of the E46 series

since 1998 release

Repair and operation of the car



BMW 3 of the E46 series
+ BMW 3 Cars (E46)
+ Current leaving and service
+ Engine
+ Cooling systems, heating
+ Power supply systems, injection and release
+ Electric equipment of the engine
+ RKPP and transmission line
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   General information and security measures
   + Leaving and repair of damages of a body
   - External elements of a body
      Removal and installation of a front bumper
      Removal and installation/check of shock-absorbers of a bumper
      Removal and installation of a rear bumper
      Removal and installation of the back shock-absorber
      Removal and installation of a cover of a fairing
      Removal and installation of a forward wing
      Removal and installation of a cowl
      Adjustment of a cowl
      Removal and installation of a trunk lid
      Adjustment of a trunk lid
      Removal and installation of the lock/cylinder of the lock of a trunk lid
      Removal and installation of a gas-filled emphasis of a cowl/trunk lid
      Replacement of moldings and emblem of model
      Removal, installation and adjustment of a door
      Removal and installation of facing of a door
      Removal and installation of the lock of a door
      Removal and installation of the cylinder of the lock
      Removal and installation of the external handle of a door
      Removal, installation and adjustment of a window
      Removal and installation of the power window
      Removal and installation of the electric motor of a window regulator
      Removal and installation of a mirror of an external look / sound signal of a high-pitch tone
      Removal and installation of glass of a mirror
      Removal and installation of the case of a mirror of an exterior
   + Internal elements of a body
+ Onboard electric equipment
+ Schemes of electric equipment



Removal and installation of glass of a mirror

 REMOVAL

Before removal of glass of a mirror warm up the car up to the temperature of +20 °C. At lower temperature clips can easily break

1 Cast away mirror glass up.

2 For protection against damage paste over an edge of a mirror and an edge of the case of a mirror with a tape.
3 Take out glass from below by means of a wedge (the shooter on an illustration). Glass can also be taken out from below fingers.

4 The socket of heating of a mirror also release Rasstykuyte, remove mirror zatemneneniye automatic equipment.
5 Remove mirror glass.


 INSTALLATION

6 Join the socket of heating of a mirror. Fix the zatemneneniye automatic equipment plug.

7 Establish mirror glass so that brackets of fastening were over pads.

Carry out installation of glass of a mirror surely in mittens or apply a pure rag. There is a danger of traumatizing owing to glass destruction!