BMW 3 of the E46 series
+ BMW 3 Cars (E46)
+ Current leaving and service
+ Engine
+ Cooling systems, heating
+ Power supply systems, injection and release
+ Electric equipment of the engine
+ RKPP and transmission line
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
- Dignostika of electric elements
Diagnostics of malfunctions of onboard electric equipment - the general information
Safety locks - the general information
Replacement of safety locks
Fusible inserts - the general information
Chain breakers (thermal relays) - the general information
The relay - the general information
Check of the electric motor of a screen wiper
Check of a stoplight
Check of the warmed back glass
Removal and installation of the sensor of temperature
+ Lighting and alarm system
+ Devices and equipment
+ Schemes of electric equipment
|
Check of the warmed back glass After inclusion of heating of back glass after a while the field with visible lines of conductors has to be cleared of rainfall or snow.
1 with malfunctions at first check a safety lock in the block of safety locks.
2 If the safety lock is serviceable, check reliability of connection of the cable plug at the left and on the right at back glass. If necessary clear of corrosion.
3 If after that heating of back glass still does not work, check electric wires and the switch, and also the relay, address to the Section of the Relay - the general information. |
|