BMW 3 of the E46 series

since 1998 release

Repair and operation of the car



BMW 3 of the E46 series
+ BMW 3 Cars (E46)
+ Current leaving and service
+ Engine
+ Cooling systems, heating
+ Power supply systems, injection and release
+ Electric equipment of the engine
+ RKPP and transmission line
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   + Dignostika of electric elements
   - Lighting and alarm system
      Removal and installation/check of a sound signal
      Initialization of remote control
      Replacement of glow lamps of external lighting
      Replacement of glow lamps of internal lighting
      Removal and installation of a headlight
      Removal and installation of a ring cover of a headlight
      Removal and installation of the electric motor of adjustment of range of light
      Adjustment of headlights
      Gas-discharge lamps of a passing beam (xenon lamps)
      Removal and installation of a back lamp
   + Devices and equipment
+ Schemes of electric equipment



Initialization of remote control

Remote control of the uniform lock needs to be installed if batteries in a key were replaced, and replacement proceeded more than one minute or if thus the key was pressed.

1 Enter the car and close a door.
2 For a short time turn the ignition key in the lock of a steering wheel in situation 1 (max. 5 c) and again return back it.

3 Take out a key, press and hold a key-2-. Quickly three times during 10 with press a key-1-. At the same time continue to hold a key-2-.


4 Release a key-2-.
5 For confirmation of successful installation twice quickly turn on electric motors of the uniform lock.