BMW 3 of the E46 series

since 1998 release

Repair and operation of the car



BMW 3 of the E46 series
+ BMW 3 Cars (E46)
+ Current leaving and service
+ Engine
+ Cooling systems, heating
+ Power supply systems, injection and release
+ Electric equipment of the engine
+ RKPP and transmission line
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   + Dignostika of electric elements
   - Lighting and alarm system
      Removal and installation/check of a sound signal
      Initialization of remote control
      Replacement of glow lamps of external lighting
      Replacement of glow lamps of internal lighting
      Removal and installation of a headlight
      Removal and installation of a ring cover of a headlight
      Removal and installation of the electric motor of adjustment of range of light
      Adjustment of headlights
      Gas-discharge lamps of a passing beam (xenon lamps)
      Removal and installation of a back lamp
   + Devices and equipment
+ Schemes of electric equipment



Removal and installation of a ring cover of a headlight

The ring cover of a headlight can separately be replaced.

 REMOVAL

1 Remove the index of turn, address to the Section Replacement of Glow Lamps of External Lighting.
2 Remove a peak under a headlight.

3 Disconnect a sealing frame-1-on a circle outside inside, starting with the index of turn of a headlight.

4 Disconnect a ring cover with brackets-2-on a circle and remove.


 INSTALLATION

5 Insert a ring cover and record it.
6 Insert a sealing frame-1-.
7 Connect a peak outside under a headlight, incline inside and record.
8 If there is a nozzle of a faroomyvatel, establish it, address to the Section Removal, installation and check of nozzles of a faroomyvatel.
9 Establish a turn signal.

In summary adjust a headlight on HUNDRED.