BMW 3 of the E46 series

1 Remove a headlight, address to the Section Removal and installation of a headlight.
2 Disconnect a ring cover.

3 Remove consolidations of the block of a headlight.

4 Wring out the headlight block from three spherical heads (two heads for manual adjustment-1-and one for adjustment of range of light-2-) and take out it. Consolidations thus are pressed through together.

5 Rasstykuyte socket-4-.
6 Turn off bolts of fastening of the electric motor of adjustment of range of light-3-and take out it.

7 Insert the electric motor of adjustment of range of light and fix it.
8 Join the socket.
9 Install the headlight block through consolidations, oprev it on three spherical heads.
10 Put on consolidations the headlight block.
11 Insert the headlight block into a ring cover and record.
12 Record a sealing frame-1-.
13 Establish a headlight and adjust it, address to the Section Adjustment of Headlights.
14 Establish a turn signal, address to the Section Replacement of Glow Lamps of External Lighting.