BMW 3 of the E46 series

since 1998 release

Repair and operation of the car



BMW 3 of the E46 series
+ BMW 3 Cars (E46)
+ Current leaving and service
+ Engine
+ Cooling systems, heating
- Power supply systems, injection and release
   Security measures and rules of observance of purity during the work with fuel system
   Removal and installation of the sensor of a reserve of fuel / fuel pump
   Check of the sensor of a reserve of fuel
   + Power supply system of petrol engines
   + System of injection of fuel of the petrol engine
   + Power supply system of diesel engines
   + System of production of the fulfilled gases
+ Electric equipment of the engine
+ RKPP and transmission line
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schemes of electric equipment



Security measures and rules of observance of purity during the work with fuel system

During the work with fuel system it is necessary to observe carefully the following security measures and purity:

- Do not use naked flame near a workplace, do not smoke and do not hold any strongly warmed subjects. There is a danger of accident! Keep in readiness the fire extinguisher.
- Watch normal ventilation of a workplace. Fuel couples are poisonous.
- The fuel system is under pressure. When opening system fuel can escape under pressure. Collect fuel a rag. Use goggles.
- Carefully clear connections and the places adjoining to them before opening.
- Stack the removed details on a pure lining and close. Apply for this purpose polyethylene or paper. Do not apply for this purpose fibrous fabric!
- Carefully close open details or put technological caps if repair lasts some time.
- Take out spare parts from packing only just before installation. Do not apply details which were stored unpacked (for example, stored in a toolbox). Establish into place only pure details.
- At open fuel system do not apply whenever possible compressed air. Whenever possible do not move thus the car.
- Do not apply the sealants containing silicone. The silicone elements which got to the engine in the engine do not burn down and damage the oxygen sensor.