BMW 3 of the E46 series

1 Remove the brake lever, address to appropriate section.
2 Remove blocks of the parking brake, address to appropriate section.

3 Remove the lock of blocks of a brake, for this purpose take out a finger-1-.

4 Turn off bolts-3-and remove a brake cable support.
5 Disconnect a cable and extend it from a protective tube.

1 Lay a cable to the lever of a brake and to a back brake.

Inserting a cable into a protective tube, watch that the support of a cable adjoined to a protective tube.

2 Connect a cable to a plastic clip.

3 Insert a cable support into a cable and fix at a brake board two bolts-2-.

4 Collect the parking brake, address to the Section Removal and installation of blocks of the parking brake.
5 Install the brake lever, address to appropriate section.
6 Adjust a brake, address to appropriate section.