BMW 3 of the E46 series

since 1998 release

Repair and operation of the car

Removal of air from brake system

After carrying out repair of brake system as a result of which pipelines disappeared, air can get to system. In this case air needs to be removed. Points soft breakdown of a pedal of a brake to availability of air in brake system. In this case leakage should be eliminated and removed air from system.

If air got into ABS hydraulic system, it is necessary to remove air from reasons of safety on HUNDRED. It takes place with leakage in the hydraulic block or if the tank of brake fluid was emptied or if during removal of air forgot to add liquid to the tank.

Air from brake system is removed the kachatelny movements of a pedal of a brake what requires the help of the assistant.
On HUNDRED air from brake system is removed, as a rule, by means of the special device. By means of such device in system via the tank for brake fluid pressure to 2.0 bars is created.

If it is necessary to remove air from all system, air separately is removed from each brake.

It becomes surely when air got into each separate support. If only one support, as a rule, was replaced or under repair enough to remove air from the corresponding support.

Sequence of removal of air:

— Support the back right.
— Support the back left.
— Support the forward right.
— Support the forward left.

1 Remove a dustproof cap from the union for removal of air. Clear the union, put on it a pure hose, lower other end of a hose in the bottle half filled with brake fluid. The corresponding hose and capacity are available on sale.

2 Ask the assistant to press a brake pedal so many time, how many is necessary for creation in system of pressure. It is felt on brake pedal resistance.
3 As soon as pressure is reached, press a pedal a foot and do not release it.
4 Unscrew half way the union for removal of air a cap key, for example the Following liquid collect HAZET I968-7 in a bottle. Watch that the end of a hose constantly was in a bottle lower than a level of liquid. If the system is opened, it is noticeable by a brake pedal pliability.
5 As soon as pressure of liquid will start falling, close the union.
6 Repeat process of a rating of system until in system pressure is not created. Press a pedal of a brake and leave on it a foot. Open the union of removal of air. Open the union until pressure starts falling. After that close the union.
7 Repeat process of removal of air until in the brake fluid coming to capacity for pumping there are no air bubbles.
8 After completion of process of pumping remove a hose from the union and put on a protective cap the union.

In the course of removal of air periodically watch the tank for brake fluid. Level of liquid should not go down significantly. Otherwise air can get to system. Add in system surely only new brake fluid!

9 Air from other supports is removed similarly.

10 After completion of process of removal of air in the tank it is necessary to add liquid to a mark "MOVE". Check a condition of sealing laying of-1 covers of the tank.

11 After removal of air when pressing a brake pedal it should not leave system softly down. If it occurs, it is necessary to repeat process of removal of air once again.

— Whether brake hoses are fixed?
— Whether the brake hose is fixed in the holder?
— Whether unions for removal of air are tightened?
— Whether enough brake fluid is filled in?
— On the working engine check tightness. For this purpose press a brake pedal by effort of 200 - 300 N (20 – 30 kg) during 10 pages. The pedal should not weaken. Check all accessions for tightness.

Brake fluid should not pour out or jump out with household waste at all. Local authorities inform drivers on places of its possible utilization.

12 in conclusion of execute some braking on the road with not heavy traffic of transport. Thus it is necessary to execute, at least, one strong braking with use of ABS (learn on a brake pedal pulsation).

Thus watch closely the transport following behind you.

home