BMW 3 of the E46 series

since 1998 release

Repair and operation of the car



BMW 3 of the E46 series
+ BMW 3 Cars (E46)
+ Current leaving and service
+ Engine
+ Cooling systems, heating
+ Power supply systems, injection and release
+ Electric equipment of the engine
+ RKPP and transmission line
+ Automatic transmission
+ Coupling and power shafts
- Brake system
   Removal and installation of brake shoes of forward wheels
   Removal and installation directing a forward brake
   Removal and installation of a brake disk of a forward wheel
   Removal and installation of brake shoes of disk brakes
   Removal and installation of a bracket of a brake of back wheels
   Removal and installation of a brake disk of a back wheel
   Measurement of thickness of a brake disk
   Brake fluid - the main data and security measures
   Removal of air from brake system
   Replacement of the brake pipeline
   Replacement of a forward brake hose
   Check of the amplifier of a brake
   Removal and installation of blocks of the parking brake
   Adjustment of the parking brake
   Removal and installation of the lever of the parking brake
   Removal and installation of a cable of the drive of the parking brake
   Removal and installation of the switch of a stoplight
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schemes of electric equipment





Removal and installation of the lever of the parking brake

 REMOVAL

1 Remove the central console, address to the Section Removal and installation of the central console.

2 Completely turn off lock-nuts and adjusting nuts of cables of the parking brake.
3 Disconnect an electric wire from the switch of the parking brake-1-for what press spring clips.

4 Unscrew screws of fastening and remove the brake lever.


 INSTALLATION

5 Enter cables into the lever of the parking brake, insert a brake and fix it screws.
6 Screw by hand nuts of cables of a brake.
7 Adjust the parking brake, address to the Section Adjustment of the Parking Brake.
8 Include ignition. The control lamp of the parking brake has to go out. If it does not occur, adjust as appropriate the lamp switch.
9 Install into place the central console, address to the Section Removal and installation of the central console.