BMW 3 of the E46 series

since 1998 release

Repair and operation of the car



BMW 3 of the E46 series
+ BMW 3 Cars (E46)
- Current leaving and service
   Introduction
   Current leaving
   General information on control
   Check of levels of liquids
   Check of a condition of tires and pressure in them. Designation of tires and disks of wheels
   Replacement of motive oil and oil filter
   Replacement of the filtering element of the air filter
   Checks of brake system
   Replacement of an element of the filter of air of salon
   Check of a condition of driving ridge belts
   Check of a state and replacement of hoses of a motive compartment
   Check of functioning of the cooling system and frost resistance of cooling liquid
   Check of a condition of system of production of the fulfilled gases
   Check of level of oil in a manual box of gear shifting
   Check of a condition of components of a suspension bracket and steering
   Check of a condition of protective covers of power shafts
   Check of level of liquid of system of hydrostrengthening of a wheel
   Visual check of a body and its bottom
   Check of seat belts
   Rotation and replacement of wheels
   Check of a state, replacement of brushes and adjustment of a corner of screen wipers
   Check of a condition of the battery, care of it and charging
   Replacement of brake fluid
   Check and replacement of spark plugs
   Check of fuel system, replacement of the fuel filter. Operation of diesel model in the conditions of winter
   Greasing of loops and locks of doors
   Replacement of the battery of a key of remote control
+ Engine
+ Cooling systems, heating
+ Power supply systems, injection and release
+ Electric equipment of the engine
+ RKPP and transmission line
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schemes of electric equipment



Replacement of an element of the filter of air of salon

The filter detaining dust and pollen of plants in system of ventilation and heating of salon is located in a water-collecting compartment under a cover. If air supply in salon sharply decreased, it is necessary to replace the filter earlier, than is provided by the plan of maintenance. Replacement is carried out in the following sequence:

1 Open a cowl. Turn clips-1-on 90 ° (1/4 turns) and uncover the air filter of ventilation of salon forward.

2 Take out the filtering element-1-.


3 Insert the new filtering element.
4 Insert in front a cover, close clips. Close a cowl.

EACH 2 YEARS OR 20 000 KM OF RUN