BMW 3 of the E46 series
+ BMW 3 Cars (E46)
+ Current leaving and service
+ Engine
+ Cooling systems, heating
- Power supply systems, injection and release
Security measures and rules of observance of purity during the work with fuel system
Removal and installation of the sensor of a reserve of fuel / fuel pump
Check of the sensor of a reserve of fuel
+ Power supply system of petrol engines
- System of injection of fuel of the petrol engine
The general information and security measures at work
Principle of work of DME system
Removal and installation of injectors
Check of system of injection of the petrol engine
Check and adjustment of turns of idling and concentration WITH
+ Power supply system of diesel engines
+ System of production of the fulfilled gases
+ Electric equipment of the engine
+ RKPP and transmission line
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schemes of electric equipment
|
Check of system of injection of the petrol engine For system search of malfunctions and their elimination special devices are required. Address to the Section Diagnostics of Malfunctions. Work it is desirable to carry out HUNDRED in conditions. Here only external checks are described.
1 Check tension and degree of a zaryazhennost of the battery.
2 Check all safety locks, address to the Section Replacement of Safety Locks.
3 Rasstykuyte and again join all shtekerny connections of the relevant electronic system. Check reliability of fastening of shtekerny connections and cables in a motive compartment.
4 Check all connections of weight and reliability of contacts.
5 Check tightness of hoses and pipelines. Pay attention to existence of a time and cracks. Tighten the weakened connections. |
|