BMW 3 of the E46 series

since 1998 release

Repair and operation of the car


BMW 3 of the E46 series
- BMW 3 cars (E46)
   Identification numbers of the car
   Acquisition of spare parts
   Technology of service, tool and equipment of a workplace
   Poddomkrachivaniye and towage
   Start of the engine from the auxiliary power supply
   Checks of readiness of the car for operation
   Automobile chemicals, oils and greasings
   Diagnostics of malfunctions
   Governing bodies and methods of operation
   Governing bodies and devices
   Gas station
   Keys, uniform lock and anticreeping system
   Security alarm system *
   Window regulators
   The hatch with a lifting and movable cover *
   Seats
   Adjustment of provision of a steering wheel
   Mirrors
   Systems of safety
   Lock of ignition and start of the engine
   Parking brake
   Manual Box of Gear Shifting (MBGS)
   Automatic Transmission (AT) *
   Lever of the switch of indexes of turn / light signal
   Screen wipers and windscreen washers
   Heater of back glass
   Tempostat (automatic equipment of maintenance of the set speed) *
   The alarm system of emergency rapprochement at a parking (PDC) *
   System of automatic stabilization of stability with the ASC+T/engine torque regulator System of dynamic control of stability of DSC *
   The air pressure monitoring system in tires (RDC) *
   Lighting and light devices
   Heater, ventilation and conditioner of air of salon
   Equipment of salon
   Running in
   Features of driving of the car
   Catalytic converter
   Anti-blocking system of brakes (ABS)
   Disk brakes
   Brake system
   Luggage compartments
   Automobile phone *
   Readjustment of headlights
   Cowl
   Unlocking of a cover of the filling hatch manually
   Drive of a lifting and movable cover of the hatch manually *
+ Current leaving and service
+ Engine
+ Cooling systems, heating
+ Power supply systems, injection and release
+ Electric equipment of the engine
+ RKPP and transmission line
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schemes of electric equipment


Tempostat (automatic equipment of maintenance of the set speed) *

Tempostat allows to remember and automatically to support the demanded speed at the level of not lower than 30 km/h.

Inclusion of a tempostat

Tempostat can be included after turn of the ignition key in situation 1. Press the button 1. Thus on a control panel the control lamp will light up.
You can use the tempostaty.

The movement with the set speed, storing of speed and dispersal

Press the button 2.

The actual speed of the movement which will be supported by a constant is entered into memory of a tempostat. Each subsequent pressing of the button speed will increase by 1 km/h.

If to hold the button 2 in the pressed situation, the car will accelerate without impact on an accelerator pedal. If to release the button, the speed reached by this moment remains in memory and will be supported at this level.

Delay

Press the button 3.

If before the movement already happened in the mode of maintenance of the set speed, by each pressing of the button speed will decrease by 1 km/h.

If to hold the button 3 in the pressed situation, at the movement in the mode of maintenance of the set speed extent of opening of a butterfly valve automatically will decrease and the movement will be slowed down. If to release the button, the speed reached by this moment remains in memory and will be supported at this level.

Interruption of work of a tempostat

At the included tempostat press the button 1. The control lamp continues to burn. If necessary you can use again the tempostaty.

Besides, work of a tempostat automatically interrupts in the following cases:

- When braking.
- At switching off of coupling or when transfer the lever of the AT selector from situation D in situation N.
- For BMW 318i, 320i, 323i, 328i: if the set speed is exceeded throughout more than 30 with and more than on 16 km/h.
- For BMW 320d: if the set speed is exceeded throughout more than 30 with and more than on 16 km/h or decreases more than by 20 km/h.

Speed call from memory

Press the button 4.

There will be a call of the last of the entered values of speed to which it at first will be brought, and then will begin to be supported at the set level. With turn of the ignition key in situation 0 tempostat it will be switched off, and the entered value of speed will be erased.

Switching off of a tempostat

Having interrupted work of a tempostat, once again press the button 1. The control lamp will go out, and the value of speed kept in memory will be erased.

To use tempostaty it is impossible if the route abounds with turns or if the increased intensity of the movement does not allow to move evenly, and also on slippery (because of snow, a rain, ice) the road or weak (gravel, sand) soil.

If at the movement under a bias of brake effect of the engine it is not enough, the set speed can be exceeded. On rises its reduction if engine capacity is not enough is possible.