BMW 3 of the E46 series

since 1998 release

Repair and operation of the car



BMW 3 of the E46 series
- BMW 3 cars (E46)
   Identification numbers of the car
   Acquisition of spare parts
   Technology of service, tool and equipment of a workplace
   Poddomkrachivaniye and towage
   Start of the engine from the auxiliary power supply
   Checks of readiness of the car for operation
   Automobile chemicals, oils and greasings
   Diagnostics of malfunctions
   Governing bodies and methods of operation
   Governing bodies and devices
   Gas station
   Keys, uniform lock and anticreeping system
   Security alarm system *
   Window regulators
   The hatch with a lifting and movable cover *
   Seats
   Adjustment of provision of a steering wheel
   Mirrors
   Systems of safety
   Lock of ignition and start of the engine
   Parking brake
   Manual Box of Gear Shifting (MBGS)
   Automatic Transmission (AT) *
   Lever of the switch of indexes of turn / light signal
   Screen wipers and windscreen washers
   Heater of back glass
   Tempostat (automatic equipment of maintenance of the set speed) *
   The alarm system of emergency rapprochement at a parking (PDC) *
   System of automatic stabilization of stability with the ASC+T/engine torque regulator System of dynamic control of stability of DSC *
   The air pressure monitoring system in tires (RDC) *
   Lighting and light devices
   Heater, ventilation and conditioner of air of salon
   Equipment of salon
   Running in
   Features of driving of the car
   Catalytic converter
   Anti-blocking system of brakes (ABS)
   Disk brakes
   Brake system
   Luggage compartments
   Automobile phone *
   Readjustment of headlights
   Cowl
   Unlocking of a cover of the filling hatch manually
   Drive of a lifting and movable cover of the hatch manually *
+ Current leaving and service
+ Engine
+ Cooling systems, heating
+ Power supply systems, injection and release
+ Electric equipment of the engine
+ RKPP and transmission line
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schemes of electric equipment



Lock of ignition and start of the engine

 


0 The wheel is blocked

The key can be inserted into the lock or is taken from it only in this situation.

Having taken out a key, slightly shake a steering wheel that it was latched on the lock.

Cars with AT:
the translation of a control lever from situation P is allowed only at the working engine (the ignition key in situation 2).

Before return of a key to situation 0 or its extraction from the lock transfer AT control lever to situation P.

1 The wheel is unblocked


Turn of a key from situation 0 in situation 1 is often facilitated by easy rocking of a steering wheel.

Some consumers of current are in working readiness.

2 Ignition is included / for BMW 320d: preheat


All consumers of current are in working readiness.

3 Inclusion of a starter


Start of the engine

Before start


- Tighten the parking brake
- Establish a control lever by a transmission in neutral situation, and in the presence of AT - in the provision of P or N.
- At a low temperature of external air squeeze out and hold pressed a coupling pedal.

Never allow operation of the engine in the enclosed space. The fulfilled gases contain colourless and not having a smell, but very poisonous carbon monoxide. Inhalation of exhaust gases is unhealthy and can cause loss of consciousness and lead to a deadly outcome.

As the car is a potential source of danger, never leave it with the working engine without supervision.

Cars with the petrol engine


Without pressing an accelerator pedal, start the engine

It is not necessary to be limited to too short-term inclusion of a starter, but also it is impossible to hold it included more long than 20 seconds. As soon as engine
it will be got, at once release a key.

Do not warm up the engine idling, and at once begin the movement at moderate turns.

If the engine (cold or superheated) is not started from the first, in repeated attempt of start:

Hold a pedal of an accelerator pressed approximately to a half of its course

Start of the cold engine at low temperatures (it is below -15 °C) and at big heights (more than 1000 m above sea level):

In the first attempt to start the engine hold a starter included slightly more long usual (about 10 seconds)

Hold a pedal of an accelerator pressed approximately to a half of its course.

If you have to start often the engine at low temperatures and at big heights, replace oil in the engine with oil of viscosity 5W-X (address to the section Replacement of Motive Oil and Oil Filter).

Cars with the diesel engine


At the cold engine:


The ignition key has to be in situation 2 until the control lamp of preheat goes out

Start the engine.

At the lowest temperatures of external air the starter can be held included till 40 seconds

At the heated-up engine:


If the control lamp of preheat does not burn, at once start the engine

Pressing of a pedal of an accelerator does not influence process of start of the engine.

Do not warm up the engine idling, and at once begin the movement at moderate turns.

Removal of air from a power supply system of the diesel engine: if the fuel tank is empty, as a rule, removals of air from a power supply system it is not required.

If nevertheless at start of the engine there are problems:

Hold a starter included within about 20 seconds.

Engine stop


To kill the engine, turn a key in situation 1 or 0.

Never take out a key from the lock on the run of the car. Otherwise at turn of a steering wheel the lock of a shaft of a steering column will be blocked.

Leaving the car, always take out a key from the lock of ignition and lock the lock of a shaft of a steering column.

Cars with RKPP:
at a parking on roads with a strong bias tighten the parking brake as inclusion of the first transfer or transfer of a backing under certain circumstances is insufficient to prevent spontaneous start-off of the car from a place.

Cars with AT:
transfer the AT selector lever to situation P.