BMW 3 of the E46 series
since 1998 release
Repair and operation of the car
BMW 3 of the E46 series
- BMW 3 cars (E46)
Identification numbers of the car
Acquisition of spare parts
Technology of service, tool and equipment of a workplace
Poddomkrachivaniye and towage
Start of the engine from the auxiliary power supply
Checks of readiness of the car for operation
Automobile chemicals, oils and greasings
Diagnostics of malfunctions
Governing bodies and methods of operation
Governing bodies and devices
Keys, uniform lock and anticreeping system
Security alarm system *
The hatch with a lifting and movable cover *
Adjustment of provision of a steering wheel
Systems of safety
Lock of ignition and start of the engine
Manual Box of Gear Shifting (MBGS)
Automatic Transmission (AT) *
Lever of the switch of indexes of turn / light signal
Screen wipers and windscreen washers
Heater of back glass
Tempostat (automatic equipment of maintenance of the set speed) *
The alarm system of emergency rapprochement at a parking (PDC) *
System of automatic stabilization of stability with the ASC+T/engine torque regulator System of dynamic control of stability of DSC *
The air pressure monitoring system in tires (RDC) *
Lighting and light devices
Heater, ventilation and conditioner of air of salon
Equipment of salon
Features of driving of the car
Anti-blocking system of brakes (ABS)
Automobile phone *
Readjustment of headlights
Unlocking of a cover of the filling hatch manually
Drive of a lifting and movable cover of the hatch manually *
+ Current leaving and service
+ Cooling systems, heating
+ Power supply systems, injection and release
+ Electric equipment of the engine
+ RKPP and transmission line
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Onboard electric equipment
+ Schemes of electric equipment
Catalytic converterThe catalytic converter reduces toxicity of the fulfilled gases.
It is allowed to fill only on unleaded gasoline.
Even insignificant impurity of tetraethyllead has enough completely to put the oxygen sensor and the catalytic converter out of action.
In order to avoid possible damages and for ensuring trouble-free operation of the engine it is necessary to follow the following rules:
- Surely carry out all established works on maintenance.
- Watch timely refueling of a tank.
- At emergence of interruptions in operation of the engine at once suppress it.
- Start by towage is possible only with the cold engine. Otherwise not burned down fuel will get to the catalytic converter. For start of the engine it is better to use auxiliary cables.
Avoid other situations at which fuel burns down not completely or does not burn down at all, for example frequent or long use of a starter with short intervals between inclusions, repeated unsuccessful attempts to start the engine (thus start or a stop of the engine serviceable in every respect does not mean), operation of the engine at the removed spark plug tip.
Surely observe the above-stated recommendations, differently not burned down fuel will get to the catalytic converter. Danger of an overheat and damage of the catalytic converter will result.
During the operation of the catalytic converter, on whatever car it was installed, high temperature develops. The heat-shielding screens mounted in a zone of exhaust devices cannot be removed or covered with anticorrosive mastic. It is necessary to watch that during the movement, during the operation of the engine idling or on the parking the heated parts of system of production of the fulfilled gases did not appear in dangerous proximity from flammable materials (a grass, foliage, straw, etc.). Otherwise there is a danger of their ignition connected with risk of severe injuries for victims and causing significant material damage.